Electronic balance level adjustment
1, when the top level in the level bubble ring, show high above the position of electronic balance, we must through the two corners of the upper rotating electronic balance, so that the bubble moves down.
2, when the level is below the level of the bubble in the ring, show that the lower position on the high side of electronic balance, we must through the two angle ofrotation of the lower part of the electronic balance, so that the bubble moves.
3, when the left bubble level in horizontal circle, revealed that the left position on the high side of electronic balance, we must through the two angle rotation of electronic balance left, right the bubble.
4, when the right level bubble in the horizontal circle, showed that the right position on the high side of electronic balance, we must through the two angle rotation of electronic balance right, make bubble shift left.
Tip: sometimes a level bubble for oblique position, which requires us to several cornerback and forth with the use of.
- Pre：Calibration of electronic bala 2014/10/27
- Next：The electronic balance market 2014/9/11
