Electronic balance three big fault and processing method
2014/10/27 Viewers:
Electronic balance three big fault and processing method of electronic balance in the use of the occasional small fault, so in the face of these failures we should be how to deal with? The following will introduce some common fault of electronic balance and solution: A, each weighing electronic balance, showing the value of non return to zero fault causes and treatment methods: 1 balance placed not level, adjust the balance level. 2 balance of short preheating time, should be preheated above 30min. 3 linear error is too large, exceed the allowed range, should be adjusted according to the specification of linear scales. 4 should be periodically to balance correction. Two, electronic balance after open no display fault cause and treatment methods: 1 balance placed the environmental difference: environmental factors include: vibration, air flow, temperature and external magnetic field, must improve the environment, close the windproof window weighing room, balance to work properly. Parameters of 2 balance menu did not set: the redeployment of menu, use the "RESET" function, the correct exit the menu, back to the factory setting three, electronic balance display "L" fault and processing method: 1 check the scale is put away, 1/1000 scales are not reliable spring too tight, adjustable loose, check the connector is loose, check the zero detection grating position is changed, the position of the grating can be adjusted up and down. Above are some of the common fault of electronic balance when in use, the hope can help to you, if you have any other questions, please feel free to contact us.
- Pre：Electronic balance show no rea 2014/10/27
- Next：Notice the use of electronic s 2014/10/27
